B-Series
5 open speaker with crossover
With Crossover – Product #15723
No Crossover – Product #10844
Design
Open Baffle Design
Rated Impedance
8 Ω
Sensitivity
94 dB (1W/1m)
Frequency Range
35 – 40,000 Hz
Includes
Bamboo Stand with 4 Brass-Collared, Bronze Spikes and Spike Cups
Volume Control
Adjustable Volume Control for Full Range Speaker Section
full specs
The creation of the The B Series 5.0 Open Speaker is the result of 40 years of experience in the Audio industry from its designer Steve Ginsberg. The definitive shape of the speaker and the solid bamboo laminate design reflect his commitment to making a reference loudspeaker, both stunning in its musicality and appearance. Two 15″ woofers provide impressive bass response without the boom of conventional box speakers. The midrange is sweet, voices come through with a natural real tone. Instruments are presented with space and air, with outstanding soundstage and imaging. The 5.0 has two external crossovers, each with two inputs, three outputs and adjustable volume control for the full range driver. The speakers come complete with spikes and bamboo feet, the crossovers come with a set of 0.5 meter jumper cables. These beautiful speakers and the crossover cabinets are soaked in an hemp oil bath for a natural beautiful finish. The 5.0’s will work with high current amplifiers tube or solid state, however the speakers were designed and voiced with our B Series Passive Amplifier and Power Amplifier.
Design: Open Baffle
Nominal Impedance: Single Input 8 Ω
Recommended Amplifiers: 25 Up to 150 Watts RMS
Sensitivity: 94 dB SPL (1W/1M)
Volume Matching: Crossover Only
Frequency Range: 27 – 40,000 Hz
Driver Details
Total Drivers: Five
Input 1:
1″ Fabric Dome Tweeter (13,000 Hz and up) 20 Watts
8″ Full Range Paper Cone Cloth Edge
Super Tweeter (40,000 Hz)
Input 2:
Up to 150 Watts
Two Paper Cone Cloth Edge Woofers
Top 15″: 30-100Hz @ 1st Order 6dB Slope
Bottom 18″: 27-50Hz @ 1st Order 6 dB Slope
Crossover Details (Optional)
Inputs: 2
Adjustable Volume Control for Full Range Speaker Section: Crossover Only
Outputs: 3
Cables: Set of 0.5-meter jumper cables with banana plugs.
Output 1 (Full Range)
100-Watt Attenuator
47-Ohm Resistor
100 Hz Single Cap Filter
Output 2 (Bass)
Single open-air inductor filter 100Hz @ 1st Order 6 dB Slope
Output 3 (Sub Bass)
Single open-air inductor filter 50 Hz @ 1st Order 6 dB Slope
Mode: Floor Standing
Finish: Bamboo Laminate Soaked in Hemp Oil
Stands: Bamboo Stand with 4 Brass-Collared, Bronze Spikes with Bamboo Spike Cups
Dimensions
H: 62.0″ (157.48cm) W: 19″ (48.26cm) D: 16.25″ (41.27cm)