P-series TA-1 Turntable

The P-series TA-1 Turntable is designed for audio enthusiasts at a competitive, cost-sensitive entry level. Our bamboo design is unique, and has been a featured product in audio shows over the past 7 years.

  • 24 Pole Synchronous AC Motor
  • 33.3 & 45 rpm
  • Belt Drive
  • Bamboo Platter
  • Levelling Legs and Sorbothane Iso Feet
  • Accommodates B and P-series  9″ Tone Arms

Weight: 4Kg or 9lbs

Dimensions: 21.5″ X 14″ (54.61cm X 35.56cm)

P-series Turntable Set-Up Video
(Youtube)

P-series TA-1 Turntable with 9″ P-series TA-1 Tone Arm
#7230 MSRP* – CAN $1554 / US $1295

P-series TA-1 Turntable (no arm)
#7229 MSRP* CAN $1194 / US $995


P-series TA-1 Tone Arm

The P-series TA-1 Tone Arm features the same, handmade bamboo design as our table. It is available together or separately and can also replace the arm of most other tables.

The 9″ version mounts on both P-series and B-series Turntables. The 12″ version only mounts on the B-series Turntable.

  • Available in 9″ and 12″ Versions (see below for more info)
  • Three Ply Bamboo Laminate 12mm Thick
  • soaked in Hemp Oil
  • Sealed in Beeswax
  • VTA & Azimuth Adjustments
  • Bronze with Brass Collar Spike and Synthetic, High Viscosity Grease Bearing
  • Anti-Skating Mechanism
  • Cardas Wire 33 AWG Uninterrupted from Headshell Clips to Brass Female RCA
  • Shielding Provided with Inconel Tubing and MuMETAL
  • Silver Plated Cartridge Clips
  • Aluminum Arm Plinth with Left, Right Female Brass RCA
  • Bamboo Pivot to Spindle Setup Jig Included
  • Micro Bubble Level Included
9 inch specs
12 inch specs

P-series TA-1 Tone Arm 9″
#7228 MSRP* CAN $420 / US $350

P-series TA-1 Tone Arm 12″
#10721 MSRP* CAN $540 / US $450


P-Series Record Clamp

Provide paramount support for your records with the P-series Record Clamp. This clamp steadies the record while it is spinning, as well as lends the unique acoustic qualities of  natural bamboo and brass to your system.

  • Bamboo Body
  • Machined Brass Core
  • Weight: 0.04kg or 0.10lbs

#7231 MSRP* – CAN $114 / US $95


Image Coming Soon!

P-series Turntable Belt (flat)

  • Replacement Belt Specially Designed for the P-series Turntable

#21027MSRP* CAN $21/ US $16


P-series Phono MM & MC Pre Amp

  • Bamboo and Aluminum Case with Internal Shielding Box
  • Stuffed with Natural Sheep’s Dampening Wool
  • 12 Volt DC Linear Power Supply (external)
  • Moving Magnet (MM)
    • 3 Gain Settings, 3 Impedance settings, OP-AMP design
  • Moving Coil (MC)
    • 3 Gain Settings, 3 Impedance settings, JFET design

#16715 MSRP* CAN $480 / US $400


P-series 35W Receiver

The P-series 35 Watt Receiver is an all-in-one integrated amplifier that sports a sleek, unique design.  Perfect for living room and office spaces, this intro-amp does it all! Send your audio files from your phone or computer to your system with its built-in Bluetooth support!

  • Available as 35 Watt Stereo
  • 3 RCA Inputs
  • Class D, Single Ended
  • 24 V DC 5 Amp
  • Pre-Amp Section Shunt Resistor Design
  • Blutooth
  • FM Tuner with External Antennae
  • DAC
    • Inputs: SPDIF & USBA
    • 4 EQ Curve Settings
  • 1/4″ Headphone Input
    • Built-In Headphone Amp
  • Features Separate Power Switches for Each Function (Blutooth, FM, DAC, Head Amp) to Prevent Unnecessary Power Consumption
  • Remote Bamboo Volume Control
  • Packed with Natural Sheep’s Dampening Wool
  • Bamboo Cabinet
  • Sorbothane Isolation Feet

#10681 MSRP* CAN $900 / US $750


Image Coming Soon!

P-series 35W Integrated Amp

  • Available as 35 Watt Stereo
  • 3 RCA Inputs
  • Class D, Single Ended
  • 24V DC 5 Amp
  • Pre-Amp Section Shunt Resistor Design
  • Remote Bamboo Volume Control
  • Packed with Natural Sheep’s Dampening Wool
  • Bamboo Cabinet

#20573 MSRP* CAN $900 / US  $700


P-series CD/Blu-Ray Player

  • Blu-Ray/CD Player
  • Remote Volume Control
  • Component Output
  • Multi-Format Playback
  • Photo Viewer
  • USB Jack
  • Dolby Digital
  • Brass 4″ Sound Isolation Plate
  • C and C cut 3/4″ Bamboo
  • Isolation Feet
  • 1/4″ Aluminum Plate
  • Bamboo Buttons
  • HDMI – Out
  • 3D Blu-Ray Compatible
  • RCA Digital Audio (SPDIF) – Out
  • RCA Analogue – Out

#9409 MSRP* CAN $900 / US  $750


Image Coming Soon!

P-series Speaker Wire 3.0 Meter (pair)

  • Single, Solid-Core Smelted, Die-Tempered Copper Wire
  • Teflon Outer Jacket
  • Braided Black Outer Sleeve Around Positive and Negative Wires
  • Terminated with Banana Plugs at Both Ends

#19352 MSRP* CAN $175 / US $150


P-series Mini Monitor (pair)

  • Full Range Speaker
    • 1 X Super Tweeter (40kHz)
    • 1 X 4 7/8″ 1-Way Extended Full-Range Emitter
  • Natural Colour Paper Cone
  • Spl 86.5 dB
  • Pwr 20w Nom.
  • 7.2 Ohm
  • 5-Way binding posts
  • Resonant Pressure Release Apertures
  • Horn Loaded Transmission Line
  • 6″ Wide X 9″ High X 12″ Deep

#7226 MSRP* CAN $1380 / US $1150 (Pair)


P-series Super Mini Monitor (pair)

  • Full Range Speaker
    • 1 X Super Tweeter (50kHz)
    • 2 X 4 7/8″ Natural Colour Paper Cone
      • 1 X Full-Range Emitter
      • 1 X 250 hz First Order X-Over
  • Spl 86.5 dB
  • Pwr 20w Nom.
  • 4.0 Ohm
  • 5-Way binding posts
  • Resonant Pressure Release Apertures
  • Horn Loaded Transmission Line
  • 6″ Wide X 16″ High X 12″ Deep

#20487 MSRP* CAN $1800 / US $1550 (Pair)


P-series Mini Tower

  • Full Range Speaker
    • 1 X Super Tweeter (40kHz)
    • 4 X 4 7/8″ Natural Colour Paper Cone
      • 2 X Full-Range Emitters
      • 2 X 250 hz First Order X-Over
  • Spl 86.5 dB
  • Pwr 20w Nom.
  • 7.2 Ohm
  • 5-Way binding posts
  • Resonant Pressure Release Apertures
  • Horn Loaded Transmission Line
  • 6″ Wide X 39″ High X 12″ Deep
  • Includes Bamboo Stand with 4 Brass-Collared, Bronze Spikes and Spike Cups

P-series Mini Towers
#20488 MSRP* CAN $2625 / US $2100 (Pair)

P-series Mini Tower Aluminum Stands (add on)
#20788 MSRP* CAN $575 / US $500 (Pair)

 


 

Image Coming Soon!

P-series Mini Audio Rack (4 shelves)

  • Available Heights: 33″
  • Solid Constraint Laminate Bamboo
  • Hemp Oil and Beeswax Finish
  • 3 Point Adjustable Bronze Spike and Brass Collar Feet

#19350 MSRP* CAN $655 / US $570


P-series Speaker Stand (Pair)

  • Available Heights: 20″,24″ & 33″
  • Solid Constraint Laminate Bamboo
  • Hemp Oil and Beeswax Finish
  • 4 Point Adjustable Brass-Collared, Bronze Spike Feet and Brass Collar Feet

#19351 MSRP* CAN $495 / US $425

P-series 20″ Speaker Stand
Coming Soon!

P-series 24″ Speaker Stand
#20551 MSRP* CAN $495 / US $425 (Pair)

P-series 33″ Speaker Stand
#19351 MSRP* CAN $495/ US $425 (Pair)


 *Prices shown for CAN/USA only and may be subject to change in other countries.